Filter
Top Products
Advanced Configuration
5-31
Upgrading Firmware
You can upgrade new SMC2555W-AG software from a local file
on the management workstation, or from an FTP or TFTP server.
New software may be provided periodically on SMC’s web site
(http://www.smc.com).
After upgrading new software, you must reboot the
SMC2555W-AG to implement the new code. Until a reboot
occurs, the SMC2555W-AG will continue to run the software it
was using before the upgrade started. After rebooting the access
point with new software, we advise resetting the configuration to
the factory default settings.
Before upgrading new software, verify that the SMC2555W-AG is
connected to the network and has been configured with a
compatible IP address and subnet mask.
If you need to download from an FTP or TFTP server, take the
following additional steps: