Filter
Top Products
System Defaults
1-9
System Defaults
The following table lists some of the access point’s basic system
defaults. To reset the access point defaults, use the CLI
command “reset configuration” from the Exec level prompt.
Feature Parameter Default
Identification System Name Enterprise AP
Administration User Name admin
Password smcadmin
General HTTP Server Enabled
HTTP Server Port 80
TCP/IP DHCP Enabled
IP Address 192.168.2.2
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS IP 0.0.0.0
Secondary DNS IP 0.0.0.0
RADIUS
(Primary and
Secondary)
IP Address 0.0.0.0
Port 1812
Key DEFAULT
Timeout 5 seconds
Retransmit attempts 3