Filter
Top Products
Interface Commands
6-73
Default Setting
Ethernet interface
Command Mode
Exec
Example
radio-mode
This command sets the working mode for the wireless interface.
Syntax
radio-mode <b | g | b+g>
• b - b-only mode: Both 802.11b and 802.11g clients can
communicate with the access point, but 802.11g clients can
only transfer data at 802.11b standard rates (up to
11 Mbps).
• g - g-only mode: Only 802.11g clients can communicate with
the access point.
• b+g - b & g mixed mode: Both 802.11b and 802.11g clients
can communicate with the access point.
Default Setting
b & g mixed mode
SMC-AP#show interface ethernet
Ethernet Interface Information
========================================
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.253
Primary DNS : 192.168.1.55
Secondary DNS : 10.1.0.55
Admin status : Up
Operational status : Up
========================================
SMC-AP#