Filter
Top Products
Command Line Interface
6-10
Command Groups
The system commands can be broken down into the functional
groups shown below.
The access mode shown in the following tables is indicated by
these abbreviations: Exec (Executive mode), GC (Global
Configuration), and IC (Interface Configuration).
Command
Group
Description Page
General Basic commands for entering configuration
mode, restarting the system, or quitting the CLI
6-11
System
Management
Controls user name, password, system logs,
browser management options, clock settings,
and a variety of other system information
6-16
SNMP Configures community access strings and trap
managers
6-35
Flash/File Manages code image or access point
configuration files
6-40
RADIUS Configures the RADIUS client used with 802.1x
authentication
6-45
Authentication Configures IEEE 802.1x port access control and
address filtering
6-50
Filtering Filters communications between wireless clients,
controls access to the management interface
from wireless clients, and filters traffic using
specific Ethernet protocol types
6-60
Interface Configures connection parameters for the
Ethernet port and wireless interface
6-64
IAPP Enables roaming between multi-vendor access
points
6-98
VLANs Configures VLAN membership 6-99