Filter
Top Products
Adjustment
Making Various Settings
53
a) When you use the remote control unit with this function,
confirm that the source image is displayed on the video
monitor. If not, press the SOURCE/MEMORY button so
that the source image will be displayed. When multiple
reduced images are being captured, after the last image
is captured, the printer prints the captured image (or
queues printing), then the printer goes to the next
memory page.
b) When multiple reduced images are being captured, after
the last image is captured, the printer goes to the next
memory page.
Adjusting the Brightness of the
Printer Window Display (Only for
the UP-21MD)
When it is hard to read the contents of the printer
window display, adjust the brightness using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the LCD-CNTR. item, then adjust the
brightness of the printer window display.
Note
If you select the left end of the scale, OFF is
displayed. In this case, no messages appear in the
printer window display when the video monitor
returns to the regular screen.
Selecting Whether the Operation
and Error Tones Sound
Whenever you press a button on the front panel or sub
panel, the operation tone sounds (one time). When an
error occurs, the alarm tone sounds (three times). You
can turn these tones on and off using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the BEEP item, then select whether or not the
operation and error tones sound by pressing the G
or g button.
CAP/S PAGE
b)
(CAPTURE/SOURCE
PAGE)
When the memory image is
displayed, the source image
appears when you press the
switch of the remote control unit.
When the source image is
displayed, the image is captured
in memory when you press the
switch. The memory page is also
changed. The captured image is
not printed.
PRINT & PAGE Starts to print when you press the
switch if the image has been
captured in the memory, and at
the same time moves to the next
memory page.
If the image has not been
captured in the memory page, the
printer does not work correctly
when you press the switch of the
remote control unit.
SRC & CAP
(SOURCE &
CAPTURE)
When you press and hold down
the switch of the remote control
unit, the source image appears.
When you release the switch, the
image showing at the instant you
release the switch is captured.
The memory page is not
changed.
SRC & C PAGE
b)
(SOURCE &
CAPTURE PAGE)
When you press and hold down
the switch of the remote control
unit, the source image appears.
When you release the switch, the
image showing at the instant you
release the switch is captured.
Then, the memory page is
changed to the next memory
page. The captured image is not
printed.
Function to be
selected
Operation
When you want to Selection
Sound the tones. ON
Disable the tones. OFF