Filter
Top Products
nTier700 BlueScale Firmware
12
Release Notes 90990019
Updating Firmware
Note: Until further notice, firmware updates for the nTier700 are
currently managed on an individual basis by Spectra Logic
Technical Support. Contact Spectra Logic Technical Support for
assistance (see Contacting Spectra Logic on page 4).
To ensure that you have the most current firmware for your nTier700:
1. Connect to the BlueScale web interface.
2. Select About on the menu bar to check the currently installed BlueScale
firmware version.
3. If the version you have is older than the most current version described
in these release notes, contact Spectra Logic Technical Support to obtain
an update.
4. If a more current firmware version is available, download the update
and install it. Refer to the current version of the Spectra nTier700 Backup
and Archive Appliance User Guide for instructions.
Note: A current support contract is required before you can download
firmware updates.
Contact Spectra Logic Technical Support at www.spectralogic.com/support
if you have any questions.
Firmware Version Requirements
FIRMWARE PACKAGE HISTORY
The following sections list information about the BlueScale firmware
packages and how they affect the nTier700 and its components. The
BlueScale firmware releases are listed in reverse chronological order, with
the most recent release listed first. All package names are followed with
the date of release (YYYYMMDD).
Important
The update to BlueScale 2.6.0.6 or later from any earlier version of the BlueScale
firmware must be performed by Spectra Logic Technical Support personnel (see
Contacting Spectra Logic on page 4).
Important
Unless otherwise stated, the known issues remain active until moved to the
resolved issues section. Always read the known issues section for each firmware
release to make sure you are aware of any potential problems.