Filter
Top Products
Updates to the User Guide
46
Release Notes 90990009
If you do not want to install ActiveX on the system, you can access the
Windows operating system directly using a keyboard, mouse, and monitor
connected directly to the nTier700 application server (see Figure 1 on
page 31 for the connector locations). Log in using the same user name and
password that you use to connect to the BlueScale web interface.
Note: Using a USB keyboard and mouse lets you connect these devices
without power-cycling the nTier700.
Connect and Log In
Use the following steps to access the Windows desktop.
Note: If you are accessing Windows using a direct connection to the
nTier700 application server, skip to Step 3 on page 47 to log in.
1. Log into the BlueScale web interface (see Access the BlueScale Web
Interface on page 40).
2. Select General > Windows Desktop. The Windows Desktop screen
displays.
Note: If you attempt to connect to the remote desktop using Firefox,
you will receive a notification that you must using Internet
Explorer.
Figure 14 The Windows Desktop message.