Filter
Top Products
Updates to the User Guide
58
Release Notes 90990009
2. Select the firmware package you want to use. The selected package
displays in the Update To field.
The most current available firmware package found during the scan
displays in the Update to field. In Figure 22, the most current version
is on the nTier firmware downloads page on the Spectra Logic web
site.
If you want to install the firmware from a different remote package
server, enter a valid URL in the Scan this web page for remote
packages text field and click Save. The nTier700 scans the specified
web page for available firmware packages.
Note: The default package server is the nTier firmware downloads
page on the Spectra Logic web site.
If you want to use a different firmware version, use the Update To
drop-down menu to display all of the available firmware package
files at each location.
3. Select Start Update.
A progress page shows the step-by-step progress of the update.
Information about the firmware update progress also appears in the
Messages page. The update may take several minutes to complete.
Important
Do not install a package that is older than the currently installed version unless you
are specifically instructed to do so by Spectra Logic Technical Support.