Filter
Top Products
nTier700 BlueScale Firmware
16
Release Notes 90990019
BlueScale2.6.0.7
This release improves the overall reliability of the nTier700.
Resolved Issues
The File Migrator installation files have been added to system disk on the
the 64-bit Windows version of the nTier700.
Note: As of BlueScale 2.7.1.7, File Migrator is no longer included with
the nTier700.
Known Issue
Problem Workaround
When RAIDs are rebuilding, the
Bluescale progress screen does not
update to reflect the actual progress,
even when the process is nearly
complete.
Note: This issue is resolved in BlueScale
2.7.1.7.
If you need to determine the status of the RAID rebuild, do
one of the following:
Monitor the BlueScale messages. The rebuild is complete
when you see a message similar to this:
Raid <raid name> in Enclosure <Enclosure #>
Chassis <Chassis #> Hba <Hba #> Expander
<Expander #> changed state from <previous
state> to OK
Use the Windows command line to determine the status.
1. Connect to the Windows desktop.
2. Select Start > Accessories > Command Prompt to open a
command prompt window.
3. Type the following command:
%ntiercurrent%\adaptec\arcconf.exe getstatus
<ctrl #>
where <ctrl #> is the number of the RAID controller on
which the RAID was being rebuilt (either 1 or 2).
4. Repeat Step 2 until the status returned is “None.”