Filter
Top Products
Appendix D—Tuning Gigabit Ethernet Network Performance
June 2010 Spectra nTier700 Backup and Archive Appliance
67
4. In the Local Area Connections pane, double-click the Local Area
Connection corresponding to the 10 Gigabit Ethernet (GigE) NIC card and
select Properties to display the Local Area Connection Properties window.
5. On the General tab, select Configure to display the Intel driver
configuration dialog box.
6. On the Advanced tab, select Max Jumbo Buffers and use the drop-down
list to select the desired maximum transmission unit size.
7. Select OK to save your changes and close the configuration dialog box.
8. Close the Local Area Connection Properties dialog box.
Figure 25 Local Area Connection
Properties.
Figure 26 Set the Max Jumbo Buffers
value.