Filter
Top Products
xii Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
FIGURE 4-6 Installing Memory into a Socket on the System Board 4-10
FIGURE 4-7 The Rotating Retention Bracket and the Position of a PCI Card 4-12
FIGURE 4-8 Using the PCI Card Retainer, Slide Support Rail, and Plastic Bracket 4-13
FIGURE 4-9 Replacing the Top Cover 4-15
FIGURE 5-1 Cable Management Bracket 5-2
FIGURE 5-2 Positioning the Slide Mounts for a Sun StorEdge 72-Inch Tall Rack 5-3
FIGURE 5-3 Positioning the Slide Mounts for a Standard 19-Inch Wide Rack 5-3
FIGURE 5-4 Fastening the Slide Mounts to a Sun StorEdge 72-inch Tall Rack–Rear View (Side Panels
Removed for Clarity) 5-5
FIGURE 5-5 Fastening the Slide Mounts to a Sun StorEdge 72-inch Expansion Rack–Front View (Side
Panels Removed for Clarity) 5-6
FIGURE 5-6 Fastening the Slide Mounts to a Standard 19-inch Rack 5-7
FIGURE 5-7 Sliding the Server Into a Standard 19-Inch Rack 5-8
FIGURE 5-8 Adjusting the Slide Mounts and Screwing the Server Into the Rack 5-9
FIGURE 5-9 Fitting the Cable Management Bracket to a Sun StorEdge or a Standard 19-Inch Rack 5-10
FIGURE 5-10 Removing the Thumbscrew Brackets 5-12
FIGURE 5-11 Fitting the Fixed Mounting Brackets 5-13
FIGURE 5-12 The Server Installed in a Two-Post Rack 5-14
FIGURE 6-1 Connecting the Cables to the Sun Fire V120 Server 6-2
FIGURE 6-2 Connecting the Cables to the Netra 120 Server 6-2
FIGURE 6-3 Patch Panel Connection Between a Terminal Server and a Sun Fire V120 6-5
FIGURE 6-4 Pins 1 to 8 on the Serial Port 6-6
FIGURE 6-5 Pins 1 to 8 on the Serial Ports 6-7
FIGURE 6-6 Pins 1 to 8 on the Serial Ports 6-8
FIGURE 1 Connecting the Server to the Serial Port on a Laptop 6-10
FIGURE 7-1 Netra 120 Server Power (On/Standby) Switch 7-7
FIGURE 7-2 Sun Fire V120 Server Power (On/Standby) Switch 7-7
FIGURE 8-1 The Location of the Lights-Out Management Device on the System Board 8-2
FIGURE 8-2 Sample Output From the environment Command 8-9