Filter
Top Products
11-10 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
2. Open the server by following the instructions in Section 4.2, “Opening the
Server” on page 4-4).
Make sure all external cables are disconnected and pay particular attention to the
information about how to prevent electrostatic discharge from your body from
damaging the components of the server.
FIGURE 11-4 The Location of the NVRAM Chip
3. Carefully take the NVRAM chip carrier lengthwise between your thumb and
forefinger and pull it out of its socket (see
FIGURE 11-5).
4. Holding the new NVRAM chip carrier in a similar fashion between your thumb
and forefinger, position it over the socket and press firmly until the connectors
engage.
NVRAM
chip
DIMM
sockets
Hard disks