Sun Microsystems 120 Server User Manual


 
6-1
CHAPTER
6
Connecting the Cables
This chapter describes how to connect the power cables and the Ethernet and serial
cables to the Sun Fire V120 and Netra 120 servers. It also tells you how to set up the
serial connections you need.
Make sure you have installed the server into a rack or cabinet (see Chapter 5) before
following the instructions in this chapter.
This chapter contains the following sections:
Section 6.1, “Connecting the Cables to the Server” on page 6-2
Section 6.2, “Using a Single DC Power Cord” on page 6-4
Section 6.3, “Setting Up Serial Connections” on page 6-4
Section 6.4, “Connecting to Your Server From a Laptop Running Microsoft
Windows” on page 6-10