Filter
Top Products
Chapter 5 Replacing a Disk Drive 93
5. Using your thumb and forefinger, pinch the disk drive latch sideways to release
the drive handle.
Pull the handle away from the drive until you feel the drive connector disengage
from the backplane connector.
6. Holding the disk drive by the handle, slide it out of the drive bay.
Note – When you reinstall the drive (or a replacement drive), be sure to install it
into the same drive bay as the one from which it was just removed.
7. Place the disk drive on an antistatic mat.
8. Repeat the procedure for the other drive (if necessary).
If you have finished removing and installing disk drives, remove the antistatic strap.