Filter
Top Products
Chapter 2 System Setup 35
3. Turn the front panel keyswitch to the Power-On/Off position.
See “About the Status and Control Panel” on page 7 for information about each
keyswitch setting.
4. Press the front panel Power button once.
See “Keyswitch Settings” on page 8 for information about each keyswitch setting.
Note – The system may take anywhere from 30 seconds to two minutes before video
is displayed on the system monitor or the ok prompt appears on an attached
terminal. This time depends on the level of power-on self-test (POST) diagnostics
being performed.
Power button
Power-On/Off position