Filter
Top Products
Chapter 5 Replacing a Disk Drive 99
Note – The system may take anywhere from 30 seconds to two minutes before the
system banner appears. This time depends on the level of POST diagnostics being
performed.
5. When the ok prompt is displayed, type the following command:
This command rebuilds the device trees for the system, incorporating any newly
installed options. After a device has been added to a device tree, it can be recognized
by the system. After the reconfiguration reboot has successfully completed, the
system prompt is displayed.
Caution – Never move the system when system power is on. Movement can cause
catastrophic disk drive failure. Always power off the system before moving it.
What Next
The system’s front panel LED indicators provide power-on status information.
For more information about the system LEDs, see:
■ “System LED Indicators” on page 9.
ok boot -r