Filter
Top Products
52 Sun Enterprise 220R Server Owner’s Guide • October 1999
How to Attach a Twisted-Pair Ethernet
(TPE) Cable
Before You Begin
If you are attaching a twisted-pair Ethernet (TPE) cable to the system’s standard
Ethernet interface, you must perform the following task:
■ Complete prerequisite steps in “How to Install the Sun Enterprise 220R Server”
on page 13
If you are installing an additional Ethernet interface, you must perform the
following tasks:
■ Install the system; see “How to Install the Sun Enterprise 220R Server” on page 13
■ Install a PCI Ethernet interface card; see the Sun Enterprise 220R Server Service
Manual
What to Do
1. Locate the RJ-45 connector for the appropriate Ethernet interface.
The system comes with one TPE connector on the back panel. Your system may also
include one or more additional TPE connectors provided via PCI Ethernet interface
cards.
2. Plug in the TPE cable to the appropriate RJ-45 connector.
You should hear the connector tab snap into place.