Filter
Top Products
Chapter 2 System Setup 27
8. Tighten the four captive screws securing the system to the left and right vertical
rails at the front of the rack.
Use a Phillips #2 screwdriver to tighten the four captive screws, which are in
recessed access holes in the filler panels affixed to the system’s front panel.
9. Reconnect every external cable previously attached to the back panel of the
system.
As you reconnect each cable, check it for information indicating the cable’s origin
and its terminating connection.
10. Reattach, close, and lock the rack door(s) as appropriate.
What Next
To power on the system, see:
■ “How to Power On the System” on page 34