Filter
Top Products
12-6 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996
12
12.3.5 Rear Screen Panel
To remove the rear screen panel:
1. Remove the two #10 Phillips screws securing the panel to the frame.
See Figure 12-3.
2. Tilt the panel top out and lift it free of the chassis. Set the panel aside.
There is a flange on the bottom of the rear screen.
Figure 12-3 Removing the Rear Screen Panel
Note – If your cabinet has a hinged rear door, remove the pins from the hinges
and lift the door free of the chassis. Reverse this procedure to replace the door.
To replace the rear screen panel:
1. Insert the panel so the bottom flange engages behind the top of the kick
panel.
2. Tilt the panel flush against the frame and secure using Phillips screws.
#10 Phillips screws
Kick panel