Filter
Top Products
E-10 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996
E
9. Disconnect the cable assembly from the front of the SCSI adapter
assembly and remove the cable assembly.
See Figure E-6.
Figure E-6 Removing the Cable Assemblies
From the Front of the SCSI Adapter Tray
To replace the cable assembly:
1. Connect the CD tray power or data cable assembly into the back of the
SCSI tray.
See Figure E-5.
2. Pull the cable assembly through the opening in the cabinet to the front of
the card cage.
The cable assembly runs through the front of the fan tray shelf and the
system cabinet pillar to the SCSI adapter assembly.
3. Connect the cable assembly into the front of the SCSI adapter assembly.
See Figure E-6.