Sun Microsystems 6.0005E+11 Computer Hardware User Manual


 
Index-6 Ultra Enterprise 6000/5000/4000 Systems ManualNovember 1996
installation, 4-23, 4-26
link integrity test, 4-24
plastic standoffs, 4-21
lock and unlock, 4-21
remove, 4-21
replace, 4-23
retainer, 4-24
test manually, 12-9
SCSI
cable configuration, D-5
tape adapter PCS assembly
remove, E-18 to E-19
replace, E-19 to E-20
target IDs
CD-ROM, C-1
disk board, C-1
default, C-2
tape drive, C-1
termination
disk board, 5-4
I/O board, 4-4
tray, target IDs, C-1
service
hot-pluggable components, 13-1
preparing for, 13-1
setup, terminal, 9-1
shut down, system
Enterprise 4000, 12-3
Enterprise 6000/5000, 12-1
side panels See panel, remove
SIMM
description, B-8
DRAMS used, 3-20
installation, 3-21
maximizing performance, 3-22
remove, 3-20
selection, B-9
slot selection
clock board, 6-8
CPU/Memory board, 3-9
disk board, 5-8
I/O board, 4-14
Solstice Symon, 9-10
specification
electrical, A-3
environment, A-4
physical, A-1
stabilizer bar
adjust for safety, 13-11
standard features, 1-1
standoff
lock and unlock, 4-21
using, 4-21
SunVTS on-line validation test suite, 9-8
switch
AC, 12-5
local/remote, 12-7
reset, initiate POST, 12-9
symbols, definitions, 11-2
system
cabinet features, B-3
master, B-8
overview, B-1
precautions, 11-4
restart, 12-7
T
tape drive
4000 system
installation, 8-10
4000 systems
remove, 8-7
replace, 8-9
6000/5000 systems
installation, 8-7
remove, 8-5
replace, 8-7
SCSI target IDs, C-1
tray
description, B-15
terminal settings, 9-1
termination
I/O board, 4-4
testing
drive, SBus card, 12-9
SunVTS on-line validation test
suite, 9-8