Filter
Top Products
Chapter 7 Using Windows Server 2003 77
Before You Begin the Upgrade
Caution – Before upgrading to a supported operating system, you must update
your Intel drivers. Refer to “Updating Intel and Linux Drivers” on page 115 for
additional information.
Before starting to upgrade Windows NT4 Server to Windows Server 2003, follow
these steps:
1. Log off all clients and other processes from the server before upgrading Microsoft
Windows and before enabling SunFSD mapping in Microsoft Windows.
Enabling SunFSD mapping enables it for all current users, creating a potential breach
in security, so caution must be employed.
2. Double-click the
fsdon.reg Registry file located at:
Caution – This enables SunFSD. Leave SunFSD enabled until after the upgrade to
Windows Server 2003 and then disable.
▼ How to Upgrade Windows NT4 Server or
Windows NT4 TS to Windows Server 2003
1. Insert the Windows Server 2003 CD into your system’s CD-ROM drive.
2. From the Start menu, choose Programs, and then choose Windows Explorer.
The Windows Explorer window opens.
3. In Windows Explorer, navigate to the following path:
Note – If you cannot find this directory on your C: drive, either you have installed
the wrong version of the SunPCi III software, or you did not update your drivers.
C:\sun\sunfsd\fsdon.reg
C:\sun\wnetupg\upgrade.bat