Filter
Top Products
42 SunPCi III 3.2.1 User’s Guide • March 2004
3. In Windows Explorer, navigate to the following path:
Note – If you cannot find this directory on your C: drive, either you have installed
the wrong version of the SunPCi III software, or you did not update your SunPCi III
drivers.
4. Double-click upgrade.bat.
The upgrade process continues. This program automatically maps a network drive
for its own use. If you do not have a network drive letter available in Windows
Explorer, the process fails.
5. Follow the prompts on the window and enter the information that Microsoft
Windows requests.
For example, enter the CD key on the back of your CD case and your administrator’s
password.
When you are finished entering all the information, the SunPCi III software reboots
into Windows XP Professional.
Tip – This step can take several minutes to complete.
6. Install the Service Pack.
To complete the process, you need to install the appropriate Service Pack. See
“Microsoft Windows Service Packs” on page 20.
Upgrading Windows 2000 Professional to
Windows XP Professional
Caution – The setup and configuration procedures for the SunPCi III software
involve some steps that differ from the Microsoft upgrade steps. Do not use the
standard Microsoft upgrade procedure provided on the Windows XP Professional
CD or the installation will fail and your emulated C: drive can become corrupted.
C:\sun\wxpupg\upgrade.bat