Filter
Top Products
154 SunPCi III 3.2.1 User’s Guide • March 2004
6. Choose Properties.
The VIA RHINE II Fast Ethernet Adapter Properties dialog box opens.
7. Click the Power Management tab.
8. Verify that the “Allow this device to bring the computer out of Standby” check
box is checked, and if it is not, check it.
9. Click the “Allow the computer to turnoff this device to save power” check box.
10. Click OK.
11. Close the Computer Management window.
Keyboard Sometimes Disappears When Leaving
Stand By Mode
Sometimes when you are “waking up” in Stand By mode to resume working, the
keyboard might work intermittently, either by disappearing or simply beeping. This
is an issue in all supported SunPCi III 3.2.1 operating systems.
If this issue occurs, you have to close Microsoft Windows and then exit SunPCi III by
choosing File and then Exit from the SunPCi III menu and then choosing the
Shutdown x86 OS and Reset SunPCi button in the SunPCi Exit dialog box.
Upon restarting, your keyboard works normally.
Red Hat Linux Issues
This section lists known issues with Linux in this release of SunPCi III software. This
section includes the following topics:
■ “Use NFS to Access Solaris Files” on page 155
■ “Physical Networking is Only Supported Network Option” on page 155
■ “Cannot Copy Graphics Between Solaris and Linux” on page 155
■ “Disk Device Naming Inconsistent During Installation” on page 156
■ “Disk Image Installation Must Complete” on page 156
■ “Firewall Prevents NIS From Working” on page 156
■ “15 Partitions per Disk Allowed” on page 156
■ “Display Issue when Viewing Emacs” on page 157
■ “Avoid Scanning Partitions for Bad Blocks” on page 157
■ “Solaris Function Keys of Cut, Copy, and Paste Do Not Work on Solaris
Keyboards” on page 157