Filter
Top Products
ES3000 User Guide
1-6
1.6 Administration of the ES3000 Ethernet Switch
There are three management user interfaces on the switch: menu-driven, CLI, and Web. The menu-
driven and CLI interfaces are accessed using a direct serial connection or via Telnet over an Ethernet
connection. The Web interface is accessible via HTTP over an Ethernet connection to the switch.
Managing the switch remotely (via Telnet or Web) requires the switch to have an IP address assigned
to it. The administrator must know what that IP address is. By default, the switch is configured to use
DHCP to obtain its IP address. If the IP address assigned to the switch from the DHCP server can be
determined, use any of the management interfaces. If not, access the switch via direct serial
connection to determine the IP address assigned via DHCP. If a DHCP server is not available on the
network, access the switch via direct serial connection to assign an IP address to the switch.
To configure or determine the IP address on the switch via direct serial connection:
1. Use HyperTerminal (or other communications utility) to secure a connection to the ES3000
Ethernet Switch.
2. Hit the return key <Enter> to display the ES3000 logon screen.
3. Enter a user name of admin and password of symbol. Press Enter.
4. Select System Admin from the main menu. Press Enter.
5. Select Access from the System Admin menu. Press Enter.
6. Select IP Config from the Access menu. Press Enter.
The System IP Configuration Menu displays.
Menu-Driven UI CLI Web UI
Via direct serial connection yes yes no
Via Ethernet connection yes, via Telnet yes, via Telnet yes, via HTML