Symbol Technologies ES3000 Switch User Manual


 
ES3000 User Guide
5-28
ip address dhcp
Use the ip address dhcp command to enable or disable the system to acquire its IP address through
DHCP.
ip address dhcp
S
YNTAX DESCRIPTION: The ip address dhcp-bootp command has no argument.
D
EFAULT VALUE: The feature is disabled by default.
C
OMMAND MODES: Layer-2 switch => Global configuration
Layer-3 switch => Interface configuration (Vlan)
R
EFERENCE:HP
M
ENU: Basic Switch Configuration Menu->System IP->Enable/Disable DHCP
Mode
E
XAMPLE:
!Set IP address use dhcp
Switch(config)# ip address dhcp
Switch(config)#
ip address renew
Use the ip address renew command to renew a DHCP ip address.
ip address renew
S
YNTAX DESCRIPTION: The ip address renew command has no argument.
D
EFAULT VALUE: The ip address renew command has no default setting.
C
OMMAND MODES: Layer-2 switch => Global configuration
Layer-3 switch => Interface configuration (Vlan)
R
EFERENCE:
M
ENU: Basic Switch Configuration Menu->System IP->IP Address Renew
E
XAMPLE:
!Renew IP address
Switch(config)# ip address renew
Switch(config)#