Filter
Top Products
Command Line Interface
5-99
dot1x re-authenticate
Use this command to re-authenticate on an 802.1X-authorized port.
dot1x re-authenticate
S
YNTAX DESCRIPTION: The dot1x re-authenticate command has no arguments or keywords.
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
! re-authenticate on port 3 now
Switch(config)# interface fastethernet0/3
Switch(config-if)# dot1x re-authenticate
Switch(config-if)#
dot1x init
Use the dot1x init command to display (initiate) status on an 802.1X-authorized port.
dot1x init
S
YNTAX DESCRIPTION: The dot1x init command has no arguments or keywords.
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
! init on port 3
Switch(config)# interface fastethernet0/3
Switch(config-if)# dot1x init
Switch(config-if)#