Filter
Top Products
Administration Console Access
3-57
Command:
Configure the switch to ensure the SPT works properly. The Common Instant Spanning Tree
Configuration Menu enables the user to configure the switch-wide parameters, such as Cist Hello
Time, Cist Maximum Age, and Cist Forward Delay.
MST Region Version: Like MST Region Name, the MST Region Version name is
required to be identical to other switches to have work
cross-switch.
MST Config Digest: Digest value of configuration data to increase the
security.
Enable/Disable Global MSTP: Enables or disables the switch-wide MSTP.
Set MSTP Protocol Version: Sets the protocol to be one among SPT (Spanning
Tree), RSPT (Rapid Spanning Tree), and MSPT
(Multiple Spanning Tree).
Cist Configuration: Configure Common Instant Spanning Tree - a switch-
wide configuration.
Cist Basic Port Configuration: Port Configuration on Common Instant Spanning Tree -
a switch-wide configuration.
Cist Advanced Port Config: Advanced Port Configuration on Common Instant
Spanning Tree - a switch-wide configuration.
Set MSTI Region Name: Sets the region name.
Set MSTI Region Version: Sets the region version.
Designated Topology Info: Designated topology information includes Port, Trunk,
Link status, CIST Designated Root, CIST Designated
Cost, CIST Designated Bridge, and CIST Designated
Port.
Regional Topology Info: Regional topology information includes Port, Trunk,
Link status, CIST Port Regional Root, CIST Port
Regional Path Cost.