Symbol Technologies ES3000 Switch User Manual


 
ES3000 User Guide
5-100
dot1x control-direction
Use the dot1x control-direction command to impose dot1x authentication on either incoming or
outgoing traffic.
dot1x control-direction <direction>
C
OMMAND MODES: Interface configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
! Set Control direction Both on port 5
Switch(config)# interface fastethernet0/5
Switch(config-if)# dot1x control-direction both
Switch(config-if)#
SYNTAX DESCRIPTION: <direction> both The dot1x authentication is imposed only
on the incoming traffic
in The dot1x authentication is imposed on
incoming and outgoing traffic