Filter
Top Products
Switch Management Overview
1-7
To use the ES3000 Command Line Interface (CLI) to configure the device:
1. Use HyperTerminal (or other communications utility) to secure a connection to the ES3000
Ethernet Switch.
2. Hit the return key <Enter> to display the ES3000 logon screen.
3. Enter a user name of admin and password of symbol. Press Enter.
4. Select Execute CLI from the Main Menu. Press Enter.
To use the ES3000 Web Management interface to configure the device:
A network connection is required between the device and the host to use the
Web Management interface to configure the device.
1. Access the Web interface (using a Web browser) by entering the switch IP address into the
address bar. Press Enter.
Internet Explorer 5.0 or later or Netscape Navigator 6.0 or later is required.