Filter
Top Products
Command Line Interface
5-111
EXAMPLE:
!Enable capacitor detection
Switch(config)# peth capacitor-detection
Switch(config)#
peth limit
Use the peth limit command to set the power limit on a port.
peth limit <mwatt>
S
YNTAX DESCRIPTION: <mwatt> Power limit 3-20 watts
D
EFAULT VALUE: 15 watt
C
OMMAND MODES: Interface configuration
R
EFERENCE:
M
ENU:
E
XAMPLE:
!Set power limit 10 watt on port 2
Switch(config)# interface fastethernet0/2
Switch(config-if)# peth limit 15
Switch(config-if)#
peth priority
Use the peth priority command for when the power budget is not enough.
peth priority <level>
S
YNTAX DESCRIPTION: <level> Critical - Set critical priority to critical
High - Set critical priority to high
Low - Set critical priority to low
D
EFAULT VALUE:High
C
OMMAND MODES: Interface configuration
R
EFERENCE:
M
ENU: