ES3000 User Guide
5-74
5.13 VLAN Commands
vlan init
Use the vlan init command to remove all vlans and reset ports to default VLAN
vlan init
SYNTAX DESCRIPTION: The vlan init command has no arguments or keywords
D
EFAULT VALUE: This command has no default setting.
C
OMMAND MODES: Global configuration
R
EFERENCE:
M
ENU: Advanced Switch Configuration Menu->IGMP Snooping->
Enable/Disable IGMP Snooping
E
XAMPLE:
!remove all vlan.
Switch(config)# vlan init
Switch(config)#
Name
member
Use the member command to create a new VLAN or modify an existing one in the system.
interface <vlanID>
name <name>
member <port list>
S
YNTAX DESCRIPTION: <vlanID> VLAN ID
<name> VLAN name
<port list> A list of port instances
C
OMMAND MODES: Interface configuration
R
EFERENCE: None
M
ENU: Advanced Switch Configuration Menu->VLAN Management->
Create VLAN Set VLAN ID VLAN Name Select Port Member