Filter
Top Products
WFM700 Series Waveform Monitors User Manual
2-11
Menus
This section describes the various menus you can access in the instrument and
provides menu diagrams showing the location of the available selections. The
menu diagrams are organized in alphabetical order.
Refer to the WFM700 Series Technical Reference document on the CD-ROM for
a detailed description of each menu selection.
Making Menu Selections
The menu system uses several different methods for entering measurement and
monitoring parameters.
Some configuration parameters use a set of boxes containing all of the possible
values or states (settings).
H The currently selected setting is highlighted.
H To change to another setting, touch the box containing that setting or press
the SELECT button to cycle through all of the settings to the desired one.
Some configuration parameters use a numeric value box.
H The knob icon appears in the value box and the parameter value is outlined.
H Use the general purpose knob to change the numeric value.
In the Configure menu, some configuration parameters use check box tables.
Touch the box on the screen to change selections.
Some configuration parameters show a list of items that you can scroll through
using the general purpose knob. Select items by using the SELECT button or by
touching the desired item on the screen.
To exit all menus except the Configure menu, press the CLR MENU button or
press any major mode button. To exit the Configure menu, press the CONFIG
button (once if you are at the top level or twice if you are in a submenu) or press
any major mode button.
Mutually Exclusive
Buttons
Numeric Value Menus
Checkbox Tables
List Box
Exiting a Menu