Filter
Top Products
Menus
2-26
WFM700 Series Waveform Monitors User Manual
Measure Mode Menu (WFM700A and WFM700HD Only)
For instruments with only WFM7A and/or WFM7HD video modules installed,
press the Measure button to access the Bowtie mode. Refer to Bowtie Mode on
page 3--14 for more information.
Measure Mode Menu (WFM700M Only)
To access the Measure menu, you must have a WFM700M or an instrument with
a WFM7M module installed.
Press the MEASURE button to open the Data menu shown in Figure 2--18. Use
the Data Display mode to view the actual data that the instrument used for
measurements. Refer to Data Display (WFM700M Only) on page 3--15.
From the Data menu, press the Measure Menu soft key to open the Measure
menu, where you can access the following displays:
H Bowtie mode (refer to Bowtie Mode on page 3--14)
H Ancillary Data display (refer to Ancillary Data Display on page 3--4)
H ARIB STD-B39 display (refer to ARIB STD-B39 Display on page 3--6)
Line<...>
Sample<...>
Measure Menu
WFM
VECTOR
PICTURE MEASURE
STATUS
GAMUT EYE
AUDIO
MULTI
VIEW
Video | Data
Select Channels
Readout Format
Measure Menu
Select Channels
Readout Format
Hex
Decimal
Binary
Done
Y
Cb
Cr
Done
Data Menu
Bowtie
Data Display
Anc Data Display
ARIB B39 Display
Anc. Data Menu
DID:<....>
SDID/DBN:<...>
Measure Menu
Anc. Data Menu
Measure Menu
Figure 2- 18: Data menu diagram