Filter
Top Products
TMS320C6712D
FLOATINGĆPOINT DIGITAL SIGNAL PROCESSOR
SPRS293A − OCTOBER 2005 − REVISED NOVEMBER 2005
45
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
EDMA module and EDMA selector (continued)
Table 23. EDMA Event Selector Registers (ESEL0, ESEL1, and ESEL3)
ESEL0 Register (0x01A0 FF00)
31
30
29 28 27 24 23 22 21 20 19 16
Reserved EVTSEL3 Reserved EVTSEL2
R−0 R/W−00 0011b R−0 R/W−00 0010b
15
14
13 12 11 87 65 43 0
Reserved
EVTSEL1 Reserved EVTSEL0
R−0 R/W−00 0001b R−0 R/W−00 0000b
Legend: R = Read only, R/W = Read/Write; -n = value after reset
ESEL1 Register (0x01A0 FF04)
31
30
29 28 27 24 23 22 21 20 19 16
Reserved EVTSEL7 Reserved EVTSEL6
R−0 R/W−00 0111b R−0 R/W−00 0110b
15
14
13 12 11 87 6 543 0
Reserved
EVTSEL5 Reserved EVTSEL4
R−0 R/W−00 0101b R−0 R/W−00 0100b
Legend: R = Read only, R/W = Read/Write; -n = value after reset
ESEL3 Register (0x01A0 FF0C)
31
30
29 28 27 24 23 22 21 20 19 16
Reserved EVTSEL15 Reserved EVTSEL14
R−0 R/W−00 1111b R−0 R/W−00 1110b
15
14
13 12 11 87 65 43 0
Reserved EVTSEL13 Reserved EVTSEL12
R−0 R/W−00 1101b R−0 R/W−00 1100b
Legend: R = Read only, R/W = Read/Write; -n = value after reset
Table 24. EDMA Event Selection Registers (ESEL0, ESEL1, and ESEL3) Description
BIT # NAME DESCRIPTION
31:30
23:22
15:14
7:6
Reserved Reserved. Read-only, writes have no effect.
29:24
21:16
13:8
5:0
EVTSELx
EDMA event selection bits for channel x. Allows mapping of the EDMA events to the EDMA channels.
The EVTSEL0 through EVTSEL15 bits correspond to the channels 0 to 15, respectively. These
EVTSELx fields are user−selectable. By configuring the EVTSELx fields to the EDMA selector value
of the desired EDMA sync event number (see Table 22), users can map any EDMA event to the
EDMA channel.
For example, if EVTSEL15 is programmed to 00 0001b (the EDMA selector code for TINT0), then
channel 15 is triggered by Timer0 TINT0 events.