Tests and Diagnostics
PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL]3-121
3.34.6.4 USB Test
1) Test content
This test accesses a file on the disk in the USB device (USB Flash Memory) to verify the file
validity.
Create a file with the specified size in the USB device and delete the file after creating it.
■ Simple Mode
This test mode creates a 4 MB file (Write), reads the file and compares it with the original
file.
■ Detail Mode
This test mode creates a 12 MB file (Write), reads the file and compares it with the original
file.
In the case of the following drive configuration, this test is performed only to the F drive.
Name Disk Type Drive Type
3.5 –inch FD (A :) 3.5-inch floppy disk FDD
Local disk (C :) Local disk HDD
DVD drive (D :) CD drive CD
Local disk (E :) Local disk HDD
Removal disk (F :) Removal disk USB
SD storage device (G :) Removal disk SD
2) Test screen
▼ Test detail: The drive under test execution is displayed..
▼ Progress status: Displays the progress status of the test with the progress bar.