Filter
Top Products
4 Replacement Procedures 4.13 Wireless LAN card
4-38 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
4.13 Wireless LAN card
Removing the Wireless LAN card
To remove the wireless LAN card, follow the steps below and refer to Figure 4-23.
1. Remove the following screws and disconnect the wireless LAN card from the
connector on the system board.
• M2×3B S-THIN HEAD screw ×1
2. Disconnect the wireless LAN antenna cables from the wireless LAN card (white
cable from “A” or “1” and black cable from “B” or “2”) using an antenna coaxial
cable disconnector.
Figure 4-23 Removing the wireless LAN card
Wireless LAN card
M2×3B S-THIN HEAD
Wireless LAN antenna cable (white)
)
Wireless LAN antenna cable (black)
)