Filter
Top Products
4 Replacement Procedures 4.19 Sound board
4-58 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
Installing the Sound board
To install the sound board, follow the steps below and refer to Figure 4-33 to 4-35.
1. Turn up the insulator and arrange the inner harness in place.
2. Stick the acetate tape in place.
3. Set the sound board to the slot of the cover assembly and secure it with following
screw.
• M2×3B S-THIN HEAD ×1
4. Connect the camera harness, sensor harness, speaker harness and inner harness
to the connector CN9540, CN9620, CN6000 and CN6050 on the sound board.
5. Set the speaker holder R to the slot and secure it with following screw.
• M2×4C S-THIN HEAD ×1