Filter
Top Products
Troubleshooting Procedures
2-28 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL]
F117 End of SC initialization RAM
CN1400,CN1410 (RAM Con
n.)
F118 Processing in front of boot RAM
CN1400,CN1410 (RAM Con
n.)
F119
Device processing in front of
boot
PCH IC1600 (PCH)
F1FF
End of IRT processing. It shi
fts to OS.
RAM
CN1400,CN1410 (RAM Con
n.)
F800 S3 shift start RAM
CN1400,CN1410 (RAM Con
n.)
F801 S4 shift start RAM
CN1400,CN1410 (RAM Con
n.)
F802 S5 shift start RAM
CN1400,CN1410 (RAM Con
n.)
F803
USB electric supply setting s
tart
PCH, EC
IC1600 (PCH)
IC3200 (EC/KBC)
F804
completion of a USB electric
supply setting
PCH, EC
IC1600 (PCH)
IC3200 (EC/KBC)
F805 Shutdown processing RAM
CN1400,CN1410 (RAM Con
n.)
F8FF
completion of Shutdown pro
cessing
RAM
CN1400,CN1410 (RAM Con
n.)
F180 S3 return service start BIOSROM, RAM
IC3000/IC3002 (BIOS ROM)
CN1400,CN1410 (RAM Con
n.)
F1FF
End of S3 return processing.
Shifts to OS.
RAM
CN1400, CN1410 (RAM
Conn.)
NOTE: Status outputted by the test means the last error detected in the debug port test.
Check 1 If the D port is status F11Eh or F120h is displayed, go to “HDD Trouble shooting
Procedure in Section 2.6.
Check 2 If any other D port status error code is displayed, perform Procedure 3.
D port error code is as follows:
Error code Contents
F003h or F004h SC initialization error
F00Bh BIOS update error
F117h Exception check error
F121h Clock generator error