Filter
Top Products
4 Replacement Procedures 4.1 Overview
4-8 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
Screw Tightening Torque
When you fasten screws, be sure to follow the torque list below.
CAUTION: Overtightening can damage components and screws; undertightening can
result in electrical shorts or other damage if screws or components come
loose.
NOTE: Toshiba recommends that you use an electric screwdriver for quick and easy
operations. (Except a M1.4 screw)
Use a non electric screwdriver to fasten a M1.4 screw, because bosses for M1.4
screws maybe broken if the screw is driven with an electric screwdriver.
• M1.4 (1.4mm) 0.098 N·m(1.0 kgf·cm)
• M2 (2mm) 0.167 N·m(1.7 kgf·cm)
• M2.5 (2.5mm) 0.294 N·m(3.0 kgf·cm)
• M3 (3mm) 0.294 N·m(3.0 kgf·cm)
NOTE: To prevent damage to THIN HEAD screws, use type 0 bit philips screwdriver.
Press along the axis of the screwdriver while turning the screw. This is because
the contact area between the screw and driver is less than for a pan head screw
(standard pan-shaped screw head).