Filter
Top Products
Tests and Diagnostics
3-126 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833))
■ In the case of FAIL
The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on
the WinPE T&D screen.
The detail of the error is printed to the log of WinPE T&D. More details are as shown below.
Message Explanation Remarks
An IP address does not
understand one.
IP address cannot be obtained. This error occurs when IP is
not assigned or the test is
conducted with a LAN card.
WSAStartup failed: xx In-use API error
xx indicates error code.
failed to set recv
timeout: xx
In-use API error
xx indicates error code.
failed to set send
timeout: xx
In-use API error
xx indicates error code.
Invalid in-address: xx In-use API error
xx indicates IP address
send to failed: xx In-use API error
xx indicates error code.
Wrote xx bytes Communication data size
unmatched
xx indicates reception size
recvfrom failed: xx In-use API error
xx indicates error code.
timed out. Time out occurred.
This is a message caused by
an error of Windows Socket
API used in the test.