Filter
Top Products
52 © 2009 VBrick Systems, Inc.
Figure 13. Connecting Control Devices
Table 11. Device Connectors
† Typical device connector.
Configuring Control Devices
You also need to configure the baud rate and passthrough state of the VBrick associated with
a control device. In VBAdmin, go to the System Configuration > Advanced Configurations >
Passthrough
page and set these values as follows:
Table 12. Baud Rate and Passthrough State
Device Connector
VCR
DB-9
†
DVD
DB-15
†
MPEG-1 Encoder DB-9
MPEG-2/4/WM Encoders RJ-45
Device Baud Rate Passthrough State
DVD 4800 Responder
VCR 9600 Responder
VBIR 2400 N/A