Filter
Top Products
68 © 2009 VBrick Systems, Inc.
4. Configure Advanced Settings for VBricks and IPRs as necessary. As noted, it is unlikely
you will ever need to change these settings. In all cases you can safely ignore these
settings and use the defaults provided by the Portal Server.
These settings generally set configuration options for source devices and destination
devices (VBricks and IPRs) so that they are configured properly (e.g. transmit/receive
enabled/disabled) at the beginning and end of a priority alert. All required devices must
be present and enabled for a successful priority alert. The settings differ depending on
the device (e.g. MPEG, WM, or H.264) you select and may include some or all of the
fields explained below.
Note Advanced Settings are available to configure VBricks and IPRs with exceptional
configuration parameters. It is unlikely you will ever need to change these settings. In
all cases you can safely ignore the
Advanced Settings and use the defaults provided by
ETV Portal Server.
Template name Alphanumeric characters or spaces. No special characters.
Schedule Type Live Broadcast
• VBrick – Select a live stream by VBrick Name. Then select the
destination VBricks or IPRs.
• Program Name – Select a live stream by Program Name from all
available. Then select the destination IPRs.
•Enter Manually – Select an MPEG or WM source residing at a
specified IP address. Then select the destination IPRs.
Stored Broadcast
• VoD Name – Select a VOD server and a source video. Then select
the destination VBricks or IPRs.
• VBrick Name – Select a VBrick (or VBStar) and a source video.
Then select the destination VBricks or IPRs.