Filter
Top Products
VISIONEER STROBE 400 SCANNER USER’S GUIDE
21
4. A Calibration window opens on-screen after Windows finishes detecting the scanner. Insert the
calibration page into the scanner in the direction shown on the calibration page itself.
Depending on the version of Windows you are using, you may be prompted to click Next to proceed
with calibration, and click Finish when calibration is complete. Follow the instructions if you see
these on-screen prompts.
5. When you’re certain that the software has completely loaded, return to the “Complete the installation
by connecting your hardware” window.
6. Click
OK.
You can also click
More to see a quick overview about accessing and navigating the OneTouch Button
Panel. When you’re finished reading the additional information, click
OK.
7. Click
Close on the Driver Installation Complete window to close and exit the driver installer.