Filter
Top Products
VISIONEER STROBE 400 SCANNER USER’S GUIDE
14
Installation
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
• Do not plug in the USB cable until after you install the software. Complete the installation steps in
the order described in this guide.
• If you are prompted to reboot the computer during installation, please select the option to restart the
computer later. Finish installing the rest of the software, then close all open windows and reboot the
computer.
• If your computer has AntiVirus or AntiSpyware software running, you may see messages during
installation asking you to allow the installation to proceed. The messages will differ based on the
software your computer is running, but in each case allow the installation to proceed. Alternatively,
you can turn off the AntiVirus or AntiSpyware software before installing your scanner. But if you do,
make sure to turn it back on again when installation is finished.
• If you already have a scanner connected to your computer, you may need to remove its driver
programs first before beginning the installation of your Visioneer Strobe 400 scanner. Please see the
User’s Guide that you received with your other scanner for specific instructions.
• If your computer is running Windows version Vista or later, you may see the Windows User Account
Control screen asking you to confirm system changes. Click the Continue button to allow the
installation to proceed.