Filter
Top Products
VISIONEER STROBE 400 SCANNER USER’S GUIDE
30
Loading Documents to Scan
This section illustrates scanning using OneTouch AutoLaunch™ and scanning with the buttons on the
scanner. After turning off AutoLaunch, as described below, you can also scan using the OneTouch Button
Panel on screen, or using a scanning application.
SCANNING USING AUTOLAUNCH
When OneTouch is installed, AutoLaunch is enabled and the scanner starts scanning when an item is
inserted in the front of the scanner. The item is scanned using the settings in the OneTouch Properties
window for the Scan button on the scanner.
SCANNING PAPER ITEMS
1. Make sure the card lever on the front of the scanner is up.
Note: Always remove any staples or paper clips from documents before inserting them into the
scanner. Staples and paper clips can jam the feed mechanism and scratch the internal components.
Also remove any labels, stickers, or Post-It™ notes that may come off during the scanning process
and get stuck in the scanner. Misuse as described here will void your scanner’s warranty.
Make sure this lever is up
before scanning paper items.