Filter
Top Products
VISIONEER STROBE 400 SCANNER USER’S GUIDE
51
2. Select the scan configuration you want to edit or delete.
• To delete the configuration, click the
Delete button.
• To edit the configuration, click the
Edit button.
Edit the settings and click
OK.
3. Click
OK to close the OneTouch Properties window.
CONFIGURE BEFORE SCAN
You can set up the scanner so that, when you press a button or click it on the Button Panel, a different
scanning interface opens before the scanning starts. To set up the scanner for this capability, you select
Configure Before Scan from the scan configuration list.
Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when you
press a button. You can then use the interface to change the Resolution, Scan Mode, and other settings.
When you scan, the scanned image will still be sent as the file type and to the same Destination
Application already selected in the OneTouch Properties window for that button.
To set Configure Before Scan:
1. Open the OneTouch Properties window.
Select the scan
configuration to edit or
delete. It must be
unlocked, as indicated
by not having a lock
displayed here.