Filter
Top Products
VISIONEER STROBE 400 SCANNER USER’S GUIDE
105
2. Hold the scanner sides firmly and pull the scanner top up to release it from the body of the scanner.
Use both hands to open the scanner, the top is held down with locking arms on both sides of the
paper feed slot. If you open only one side, you may warp the scanner top.
3. Using the cleaning cloth, wipe down all surfaces in the scanner. There are rollers and scanner glass in
both the scanner body and the underside of the scanner lid.
If you are seeing lines in the scanned image, and calibration did not resolve the issue, make sure there
is nothing stuck on the glass plates in the scanner.
4. Gently close the scanner lid. Press down on it until you hear a click as the arms lock the scanner lid in
place.
Do not press down on the card lever, on the front of the scanner, when closing the lid.