Filter
Top Products
Problem solving
6-12 DocuTech 61xx Operator Guide
a. Using the wire cutters, slowly and carefully pull
approximately 3 feet (1 meter) of wire out of the stitcher
plug.
b. The wire cutter tool needed to perform this procedure is
located next to stitcher spool B, as shown in the lower left
corner of figure 6-1.
c. Cut the wire carefully, leaving approximately 2 inches (50
mm) of wire extending from the stitcher plug, as shown in
figure 6-3.
Figure 6-3. Cutting the wire
7. Insert the plug into the measuring bracket, as shown in figure
6-4.