Filter
Top Products
Problem solving
DocuTech 61xx Operator Guide 6-21
Cleaning the Q1222 and Q1210 sensors
Cleaning the Q1222 and the Q1210 sensors should be
performed only when directed by a Customer Support Center
Representative.
Perform the following when it is necessary to clean the Q1222
and the Q1210 sensors.
1. Open the finisher top cover.
2. Look down at the rear section of the tilt bed area, as shown in
figure 6-13, to view the sensors.
Figure 6-13. Locating the Q1222 and Q1210 sensors
3. Locate the Q1222 and Q1210 sensors, as shown in figure 6-
14.